This is the TIP Number of the Project for which design file
will be created. It is by default the first letters of the file
to be created.
Once a TIP Number has been entered and a design file created
the information (ie. Unit, Type, and Directory) pertaining to
the TIP is saved. If at a later time new design files are to
be created for this TIP number the information will be recalled
by clicking on the down arrow on the right end of the TIP Number
field. Then select the correct TIP Number from the drop-down
list. This will cause the Unit, Type, and Directory fields to
update to their saved values. A new design file may then be
created
This appears as first set of character string designating the
TIP number in the file name.
Disclaimer:
The content on the CADD Tutorial Web Pages are to be use as a general guide
in producing a set of NCDOT Roadway plans. It should not be used as the
sole reference to seal a set of plans. All other official manuals, such
as THE
ROADWAY DESIGN MANUAL and AASHTO A POLICY ON GEOMETRIC DESIGN OF HIGHWAYS
AND STREETS (The "Green" Book) take precedence. The content contained
on the CADD Tutorial web pages has no legal merit.
NC DOT
NC DOH
NC GOV
