Sample Gore Criteria

XSECTION

PROPOSED XS

/* >>> For english, reset the tolerance to 0.10 <<< */
Tolerance = 0.10

PATTERN BY STATION
PATTERN SET
JOB NUMBER = RDY
BASELINE = L
HORIZ SCALE = 10
VERT SCALE = 10
BEGINNING STATION = 16800
ENDING STATION = 16800
EVEN = 50
LT = 250
RT = 250

DEFINE "TM01 CONFIG" 0

DEFINE "SH01 WIDTH CUT" 12
DEFINE "SH01 WIDTH FILL" 12
DEFINE "SH01 PAVED" 10

DEFINE "SH02 WIDTH CUT" 12
DEFINE "SH02 WIDTH FILL" 12
DEFINE "SH02 PAVED" 4

DEFINE "MDS01 METHOD" 0
DEFINE "MDS01 DITCH SLOPE" 8

DEFINE "FD01 DITCH WIDTH" 12
DEFINE "FD01 DITCH SLOPE" 6

DEFINE "PAVEMENT DEPTH" 18
DEFINE "RESURFACE DEPTH" 3

DEFINE "CC01 CURB TYPE" 1
DEFINE "CC01 BERM WIDTH" 12
DEFINE "CC01 BASE DEPTH" 11

DEFINE "CS01 FILL SLOPE" 2
DEFINE "CS01 CUT SLOPE" 2

DEFINE "VL01 CONFIG" 2
DEFINE "VL01 CHAIN" 211LPB
DEFINE "VL01 PROFILE" 211LPB

DEFINE "EOP IN XSC" 0

/* >>> For english, change the extension from .met to .eng <<< */
include L:\standard.eng
include L:\cc_defs.eng

CRITERIA FOR SHAPE CLUSTER
SHAPE CLUSTER BASELINE = L
SHAPE CLUSTER PROFILE = LLPRO
SHAPE CLUSTER TIE = -42

SIDE SLOPE LT
include L:\tmplt01.cri
include L:\shld01.cri
include L:\fdss01.cri

SIDE SLOPE RT
include L:\tmplt01.cri
include L:\shld02.cri
include L:\mdnds01.cri

CRITERIA FOR SHAPE CLUSTER
SHAPE CLUSTER BASELINE = L
SHAPE CLUSTER PROFILE = LRPRO
SHAPE CLUSTER TIE = 42

SIDE SLOPE LT
include L:\tmplt01.cri
include L:\shld02.cri
include L:\mdnds01.cri

SIDE SLOPE RT
include L:\tmplt01.cri

CRITERIA FOR SHAPE CLUSTER
SHAPE CLUSTER BASELINE = 211LPB
SHAPE CLUSTER PROFILE = 211LPB
SHAPE CLUSTER TIE = 0

SIDE SLOPE LT
include L:\tmplt01.cri
include L:\gore.cri

SIDE SLOPE RT
include L:\tmplt01.cri
include L:\cc01.cri
include L:\cslp01.cri
include L:\vl01.cri

SHAPE DGN = [TIP]_RDY_SHP_[DESC].DGN
SHAPE SET
TYPE = CMP_SHAPE
LVNAME = Prop Geopak Pavement Shape Dependent
LVNAME = Prop Geopak Pavement Shape Independent

XS DGN = [TIP]_RDY_XSC_[DESC].DGN
EXISTING GROUND LINE
TYPE = LINE,LINE_STRING
LVNAME = Exist XS Ground Line

PLOT PARAMETERS
LINE
LVNAME= Prop XS Dump Level

PAVEMENT THICKNESS = 0.0
DO NOT FILL GAPS BETWEEN CLUSTERS
WRITE XS INTO DGN = [TIP]_RDY_XSC_[DESC].DGN

/*** Extra line needed to be copied into your input file. ***/

 

 

 

 

Disclaimer: The content on the CADD Tutorial Web Pages are to be use as a general guide in producing a set of NCDOT Roadway plans. It should not be used as the sole reference to seal a set of plans. All other official manuals, such as THE ROADWAY DESIGN MANUAL and AASHTO A POLICY ON GEOMETRIC DESIGN OF HIGHWAYS AND STREETS (The "Green" Book) take precedence. The content contained on the CADD Tutorial web pages has no legal merit.