Sampson County, North Carolina
Excavations at a Blacksmith Shop at Clear Run Plantation

In order to view the following reports, you must have Adobe Acrobat Reader installed.

List of Figures

Figure 1:	Location of Project Area.
Figure 2:	Clear Run National Register Boundary.
Figure 3:	Contributing Resources at Clear Run Plantation.
Figure 4:	Site 31SP300*1* Prior to Excavation.
Figure 5:	Site 31SP300*1* Prior to Excavation.
Figure 6:	Map Showing the General Site Area, 31SP300*1*.
Figure 7:	10-x-10-Foot Unit S20E30 Profile, Facing West.
Figure 8:	5-x-5-Foot Unit S40W21 Profile, Facing South.
Figure 9:	5-x-5-Foot Unit S20W3 Profile, Facing South.
Figure 10:	Map of Site 31SP300*1* Showing Locations of Features.
Figure 11:	Planview of Feature 8.
Figure 12:	Planview of Feature 8, S0E30 and S10E30, Facing North.
Figure 13:	Planview of Unit S10E30 at Top of Zone 2.
Figure 14:	Planview of Unit S10E40 at Top of Zone 2.
Figure 15:	Profile of Feature 12, Facing East.
Figure 16:	Profile of Features 7 and 12, Facing East.
Figure 16a:	Planview of Features 7, 11, 12, and 13.
Figure 17:	Planview of Features 1 and 2.
Figure 18:	Planview of Feature 1, Unit S10E30, Facing North.
Figure 19:	Profile of Feature 1, Facing East.
Figure 20:	Profile of Feature 1, Unit S10E30, Facing East.
Figure 21:	Planview of Feature 10, Unit S10E30, Facing North.
Figure 22:	Planview of Feature 10.
Figure 23:	Profile of Timber Supports in Feature 10, Facing North.
Figure 24:	Profile of Feature 10, Facing East.
Figure 25:	Profile of Feature 10, Facing East.
Figure 26:	Planview of Feature 7 (floor joists).
Figure 27:	Planview of Feature 7 (floor joists).
Figure 28:	Planview of Unit S20E40 at the Base of Zone 2.
Figure 29:	Planview Features 5 and 6, Unit S20E40.
Figure 30:	Planview of Unit S0E40 at the Top of Zone 2.
Figure 31:	Planview of Feature 11, Facing North.
Figure 32:	Profile of Feature 11, Facing North.
Figure 33:	Planview of Unit S30E40 at the Top of Zone 1 and 2 Interface.
Figure 34:	Planview of Unit S30E40, Showing Planview of Feature 14, Facing North.
Figure 35:	Planview of Unit S30E20 at the Top of Zone 2.
Figure 36:	Planview of Feature 16, Unit S45W10.
Figure 37:	Planview of Feature 17, Unit S45W32.
Figure 38:	Sample of Cut Nails from 31SP300*1*.
Figure 39:	Sample of Wire Nails from 31SP300*1*.
Figure 40:	Wrought Nails from 31SP300*1*.
Figure 41:	Sample of Nuts and Bolts from 31SP300*1*.
Figure 42:	Felloe Plates from 31SP300*1*.
Figure 43:	Axle Clips and Wagon Hardware from 31SP300*1*.
Figure 44:	Thimble Skins from 31SP300*1*.
Figure 45:	Horse and Mule Shoes from 31SP300*1*.
Figure 46:	Bridle Part from 31SP300*1*.
Figure 47:	Tool Fragments from 31SP300*1*.
Figure 48:	Tong Fragment from 31SP300*1*.
Figure 49:	Gun Parts from 31SP300*1*.